Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
en:scratchbook:base-system [2011/05/13 23:04] – lebardixen:scratchbook:base-system [2026/10/14 23:55] (current) – external edit 127.0.0.1
Line 19: Line 19:
    # cd src    # cd src
  
-  * Linux Kernel 2.6.20 (http://www.kernel.org/).+  * Linux Kernel 2.6.20 (https://www.kernel.org/).
  
-   # wget ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-2.6.20.tar.bz2+   # wget https://mirrors.edge.kernel.org/pub/linux/kernel/v2.6/linux-2.6.20.tar.bz2
  
-  * Busybox 1.2.2 (http://www.busybox.net/).+  * Busybox 1.2.2 (https://www.busybox.net/).
  
    # wget http://www.busybox.net/downloads/busybox-1.2.2.tar.bz2    # wget http://www.busybox.net/downloads/busybox-1.2.2.tar.bz2
  
-  * Syslinux 3.35 (http://syslinux.zytor.com/).+  * Syslinux 3.35 (https://wiki.syslinux.org/).
  
-   # wget ftp://ftp.kernel.org/pub/linux/boot/syslinux/3.xx/syslinux-3.35.tar.gz+   # wget https://mirrors.edge.kernel.org/pub/linux/utils/boot/syslinux/3.xx/syslinux-3.35.tar.gz
  
   * SliTaz tools 1.1. Download SliTaz tools, unpack, save the file in src/ and that's it:   * SliTaz tools 1.1. Download SliTaz tools, unpack, save the file in src/ and that's it:
Line 42: Line 42:
 ==== Linux Kernel ==== ==== Linux Kernel ====
  
-Your kernel must support the intramfs filesystem, otherwise the cdrom will not start. You can also install the modules in a directory so as not to touch the host system. The configuration of the Linux kernel sources is done by "make menuconfig" using ncurses or graphically with "make gconfig" or "make xconfig" using GTK development packages and/or QT respectively. You can find in [[http://doc.slitaz.org/en:cookbook:slitaztools|SliTaz tools]], Makefiles for the various 2.6.xx kernels.+Your kernel must support the intramfs filesystem, otherwise the cdrom will not start. You can also install the modules in a directory so as not to touch the host system. The configuration of the Linux kernel sources is done by "make menuconfig" using ncurses or graphically with "make gconfig" or "make xconfig" using GTK development packages and/or QT respectively. You can find in [[en:cookbook:slitaztools|SliTaz tools]], Makefiles for the various 2.6.xx kernels.
  
 A feature of the 2.6 kernels is that if we make menuconfig, xconfig or config for the first time, the setup menu is displayed based on the configuration of our current kernel. A feature of the 2.6 kernels is that if we make menuconfig, xconfig or config for the first time, the setup menu is displayed based on the configuration of our current kernel.
Line 241: Line 241:
 ==== /etc/busybox.conf ==== ==== /etc/busybox.conf ====
  
-The configuration file for BusyBox, it can set duties on BusyBox applications. For more information, you can read the [[http://doc.slitaz.org/en:handbook:security|security]] page in the Handbook. BusyBox.conf file:+The configuration file for BusyBox, it can set duties on BusyBox applications. For more information, you can read the [[https://doc.slitaz.org/handbook/admin.html|security]] page in the Handbook. BusyBox.conf file:
  
    # nano etc/busybox.conf    # nano etc/busybox.conf
Line 357: Line 357:
 ==== /etc/init.d/rcS ==== ==== /etc/init.d/rcS ====
  
-To finish off this draft, you must create the init script /etc/init.d/rcS to mount the filesystems and run some commands. For more information, you can look at the [[http://doc.slitaz.org/en:cookbook:bootscripts|boot scripts]] page. You can change the value of the variable KMAP= for the keyboard:+To finish off this draft, you must create the init script /etc/init.d/rcS to mount the filesystems and run some commands. For more information, you can look at the [[en:cookbook:bootscripts|boot scripts]] page. You can change the value of the variable KMAP= for the keyboard:
  
    # mkdir etc/init.d    # mkdir etc/init.d
 
en/scratchbook/base-system.1305327886.txt.gz · Last modified: by lebardix